Home > Poly Polyol & Polymer Polyol >

Conventional Poly Polyol for Flexible Foam Production

Product Categories

Blend Polyols [105]
Grouting Materials [10]
Polyurethane Waterproof Coating [10]
Universal Seat Slider [1]
Poly Polyol & Polymer Polyol [26]
Polymeric MDI [41]
Toluene Diisocyanate TDI [10]
Polyurethane Silicone [13]
Polyurethane Catalyst [45]
Color Paste [19]
Dichloromethane [1]
Polyurethane Spray And Grouting Machine [20]
Dipropylene Glycol [2]
Propylene Glycol [1]
Pharmaceutical Intermediate [2]
Manganese Dioxide [19]
Lift And Elevator [1]

Vida New Material Technology Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Conventional Poly Polyol for Flexible Foam Production

Ask Lasest Price
Price :	Negotiable
Delivery Time :	Peak Season Lead Time: within 15 workdays, Off Season Lead Time: within 15 workdays
Payment Terms :	T/T, L/C
Supply Ability :	10000tons/Year

Add to Cart

Product Details
Company Profile

Conventional Poly Polyol for Flexible Foam Production

V3500 is a tri-hydroxyl poly, prepared by polymerization of glycerol with propylene

oxide and ethylene oxide in the presence of a base catalyst, followed by fine purification.

Specification

Property	Guaranteed
Hydroxyl Value(mgKOH/g)	%
Acid Value(mgKOH/g)	mPa.s,25ºC
Moisture(%)	0.08max
PH	5-7
Unsaturation Value(meq/g)	<0.05
Molecular Weight	3500
Colour(APHA)	<80

Packing

210KGS DRUMS,FLEXIBAG

Handling Precautions
Flash point is above 200ºC (open cup method), flammable but non-explosive. In case of fire, put out with foams, dry powder, steam or water.
It is almost non-toxic, and the steam can irritate the eyes. When inhaling the steam, it can cause headache, loss of appetite, vomiting and other skin stains, and then wash with soap and water. When the eyes touch, wash with low-pressure water or consult a doctor. If skin contact occurs, wash exposed areas thoroughly with soap and water.

Storage

Recommended storage temperature (ºC):10-35
Shelf life (ex-works) 12 months if stored in sealed, moisture-tight containers.
Partially used containers should be tightly resealed due to the hygroscopic nature of the product.

Conventional Poly Polyol for Flexible Foam Production with Tdi and Other PU Additives

Conventional Poly Polyol for Flexible Foam Production

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Vida New Material Technology Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Explore more Poly Polyol & Polymer Polyol products from this supplier

Find Similar Products By Category:

Chemicals

Hot Searches: